work holding devices; magnetic chuck from China manufacturer

Payment Terms:	T/T,L/C
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DM-QMC70

Production Capacity: 100sets/month

Delivery Date: about 30 days

Magnetization output time: 0.1~0.9S

Size of the square poles: 74X74

Brand name: MaxMagnet

Means of Transport: Ocean

Packing: Wooden case

power: three-phaseAC380V

Output current: less than or equal to DC60A

Magnetic strength: 7kgf/cm2--18kgf/cm2

All JIT and SMED procedures can be optimized with a mold changing time reduced up to 90% compared to a conventional clamping system.

DM-QMC is mainly designed against long clamping mould time, complex operation and low security of injection molding machine, punch and mould closing device. This system uses permanent-electro magnetic plate as fixed and moving plate. It can clamp or take mould through MAG/DEMAG process by simply turning safety key (removable) and push MAG/DEMAG button, accomplishing mould-changing truly in 3 minutes. It can be installed on new machine as standard equipment to sale to final customers; also can be on the traditional machine, adding 3 minutes mould change function but not changing original structure, which is practical and convenient.

Damon Quick Mould Change is using electrical impulses to open and close magnetic mould replacement system. Using the different characteristics of different magnetic materials designed to best magnetic circuit, Through the electronic control system for the distribution of internal magnetic circuit control and conversion, Make permanent magnet field in the system itself balance, The external characterizationThe external characterizationThe external characterization is demagnetization or relaxation state; Or released into templates work surfaces, The external characterization is magnetization or mould clamping state.

electro permanent magnetic quick mold Clamping Systems for 2400T Injection

All JIT (just in time) and SMED (single minute exchange die) procedures can be optimized with a mold changing time reduced up to 90% compared to a conventional clamping system. Molds can be conveniently loaded from top or with a side loading device, perfectly matched and placed on the magnetic surface, without any further adjustment. DM-QMC is suitable for all the molds with steel back plate,even with a small size, with no modification.

A magnetic clamping mould avoids deformation and avoid the effect of internal tension.Clamping force evenly distributed throughout the contact surface, Rather than a traditional clamping press several points, Make mould injection molding, stamping out products maintain consistency.